Our Top 10 Recommendations for Oscilloscope Kits
Up-to-date pricing and reviews for oscilloscope kits on the market
Bestseller No. 1
kuman DSO 138 DIY Oscilloscope Kit Opening Source 2.4" TFT 1MSPS Digital Oscilloscope Kit with DIY Parts & Probe, Handheld Pocket Sized 13803K, SMD pre-soldered
- Dso138 2. 4" Tft 1msps digital oscilloscope kit for DIY it's easy to solder.
- Oscilloscope functions with no fancy features. Simplicity in structure and easiness in assembly
- It uses 2. 4-Inch tft lcd (320 x 240 dot-matrix, 262K colors) as its display element and displays nice
- Detailed assembly instructions are provided in combination with troubleshooting guide and schematc.
- 7-24 friendly customer service provided.
Bestseller No. 2
kuman JYE Tech DSO Shell Oscilloscope DIY Kit with Open Source 2.4 inch Color TFT LCD+ Shell + DIY Parts + Probe 15001K (SMD pre-soldered)
- 【Update From kuman 13803K】The sensitivity of DSO Shell oscilloscope has been extended in both directions and is higher and wider than DSO138 oscilloscope. It reaches 5mV/div --- 20V/div while DSO138 is only 10mV/div --- 5V/div
- 【More Applications】 Display and MCU are now mounted on the same board (mainboard) to avoid using inter-board pin-headers, Analog channel is placed on a separated board which contains most user install parts. This brings in better separation between analog and digital circuits. Without the analog portion the mainboard can be used in many other applications.
- 【Rotary encoder has been added】 It makes parameter adjustment much quicker and easier.
- 【DSO Shell comes with full enclosure】 The front panel and top/bottom brackets are flexible for easy user modification.
- 【Detailed Instruction】Detailed assembly instructions are provided in combination with troubleshooting guide and schematic.
Bestseller No. 3
DSO 138 Oscilloscope Kit Open Source with Probe 2.4" TFT 1Msps Digital Oscilloscope Kit with DSO 138 Case + Probe 13803K for Electronic Learning Set
- This kit uses ARM Cortex-M3 processor (STM32F103C8), and includes a 2.4-inch color TFT display screen, can be used as ARM test development board.Can freeze at any time waveform display (HOLD function).Comes 1Hz /3.3V square wave test signal source.
- With automatic, regular and one-shot modes, easy to capture the moment waveform.Available rising or falling edge trigger.Observable previous trigger waveform (negative delay).
- With waveform parameter digital display, including frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values.Waveform storage function: will not lose the waveform after power off.
- Partially open-sourced,the MCU has been programmed.The oscilloscope circuit boards components are pre-soldered, no need soldered by yourself.The case is unassembled and requires assembly.
- Adjustable vertical displacement,and with instructions,which increase the likelihood of adding different features or developing new applications on the hardware for users.
Bestseller No. 4
Quimat Updated 2.4" TFT Digital Oscilloscope Kit with Power Supply and BNC-Clip Cable Probe Q15001 (Assembled Finished Machine)
- UPGRADED VERSION - The sensitivity of Q15001 has been extended in both directions and is higher and wider. It reaches 5mV/div - 20V/div. Also, this updated version can be handheld.
- DESIGNING TO YOUR NEEDS - Display and MCU are mounted on the same board (mainboard) to avoid using inter-board pin-headers. Analog channel is placed on a separate board that contains most user install parts, so the analog and digital circuits can be better separated.
- ROTARY ENCODER - It has been added the rotary encoder, makes parameter adjustment quicker and easier.
- ASSEMBLED FINISHED - Quimat Q15001 oscilloscope is an Assembled finished Machine. NOT DIY PART, it can be used directly to avoid assembling welding process problems and greatly saves the assembly time.
- WHAT YOU GET - You will get an assembled oscilloscope, BNC-clip cable and a power pupply. Detailed Operation instructions troubleshooting guide and schematic are also provided.
Bestseller No. 5
YEAPOOK Handheld Digital Tablet Oscilloscope Portable Storage Oscilloscope Kit with 2 Channels, 100Mhz Bandwidth, 1GSa/s Sampling Rate 7" TFT LCD Touch Screen
- 𝐏𝐫𝐨𝐟𝐞𝐬𝐬𝐢𝐨𝐧𝐚𝐥 𝐃𝐞𝐬𝐢𝐠𝐧𝐞𝐝 : 2 channels, 100 MHz analog bandwidth @ 1 GSa/s Real-time sampling, 240kbit Sample memory depth.
- 𝐇𝐃 𝐒𝐜𝐫𝐞𝐞𝐧 : 7'' color TFT- LCD touch screen with 800 * 480 resolution.
- 𝐄𝐚𝐬𝐢𝐥𝐲 𝐌𝐞𝐚𝐬𝐮𝐫𝐢𝐧𝐠 :Auto/Normal/Single 3 Trigger modes,it is easy to capture instantaneous waveform.
- 𝐈𝐧𝐭𝐞𝐥𝐥𝐢𝐠𝐞𝐧𝐭 𝐀𝐧𝐭𝐢-𝐛𝐮𝐫𝐧 : Built-in high-voltage protection module,can tolerate a continuous voltage of up to 400V.
- 𝐕𝐞𝐫𝐬𝐚𝐭𝐢𝐥𝐞 : ASD1013D is widely applicable in the academic experiment, electronic product design,debugging and maintenance, electronic engineering education, etc.
Bestseller No. 6
SaleBestseller No. 7
YEAPOOK ADS5012h Handheld Digital Portable Oscilloscope Mini Storage Oscilloscope Kit with 100MHz Bandwidth 500MS/s Sampling Rate 2.4'' TFT LCD Display
- 𝐂𝐨𝐬𝐭 𝐄𝐟𝐟𝐞𝐜𝐭𝐢𝐯𝐞 : 100 MHz analog bandwidth,Real-time sampling rate up to 500MSa / s and the price is moderate.
- 𝐇𝐃 𝐒𝐜𝐫𝐞𝐞𝐧 : 2.4'' color TFT- LCD display with 320 x 240 resolution.
- 𝐏𝐨𝐫𝐭𝐚𝐛𝐥𝐞 : Ultra small form factor easy to hand-held and carry. it's always ready when you need it.
- 𝐎𝐧𝐞 𝐊𝐞𝐲 𝐒𝐚𝐯𝐢𝐧𝐠 : The built-in 64 MB flash storage for up to 2000 waveform images.The storage process is easy and fast.
- 𝐄𝐚𝐬𝐢𝐥𝐲 𝐌𝐞𝐚𝐬𝐮𝐫𝐢𝐧𝐠 : Auto/Normal/Single 3 Trigger modes,it is easy to capture instantaneous waveform.
Bestseller No. 8
STARTO Handheld Digital Oscilloscope Kit 2.4” TFT with BNC-Clip Cable Probe and Power Supply
- STARTO SQ15001 oscilloscope is an assembled finished machine. NOT DIY PART, it can be used directly to avoid assembling welding process problems and greatly saves the assembly time.
- The sensitivity has been extended in both directions in width and height, which is wider and higher than others. It reaches 5mV/div -- 20V/div, while others is only 10mV / div - 5v / div.
- It has been added the rotary encoder, makes parameter adjustment more quicker and easier
- For this updated digital oscilloscope, includes a 9V power adapter, so you can use it by plug it in directly, so convenience that you don't need to place another order for the power adapter.
- Detailed Operation instructions, troubleshooting guide and schematic are also provided.
Bestseller No. 9
DSO 138 DIY Oscilloscope Kit Opening Source 2.4" TFT 1MSPS Digital Oscilloscope Kit with DIY Parts & Probe, Handheld Pocket Sized 13803K, SMD Soldered Electronic Learning Set
- Digital DIY oscilloscope uses ARM Cortex-M3 processor and contains a 2.4-inch color TFT display, which can be used as an ARM development test board.
- Let you effectively observe and measure signal waveforms in many occasions such as audio, video synchronization, low-frequency switching power supply, infrared receiving and transmitting.
- Can make a tailor-made software development on the basis of this kit, which can be can be changed to millivoltmeter, data recorder, etc.
- The variety of components is suitable for students to understand the oscilloscope structure and principles, and do in-line component welding, and chip component welding training.
- The oscilloscope kit is a kit specially designed for professional teaching and training in electronics. Please note that this kit need to be assembled and soldered by yourself.
Bestseller No. 10
Digital LCD Oscilloscope JYE Tech 068 DIY KIT
- 1 Channel, Resolution - 8 bits, Analog bandwidth - 0 - 3MHz
- Max input voltage - 50Vpk (1x probe) [400Vpk for 10x probe]
- Auto/Normal/Single trig modes
- Rising/Falling edge trigger
- FFT function available