Our Top 10 Recommendations for Fluke Oscilloscopes

Up-to-date pricing and reviews for Fluke oscilloscopes on the market

Bestseller No. 1

The Fluke ScopeMeter 120B Series is a rugged oscilloscope for industrial electrical and electro-mechanical equipment troubleshooting and maintenance.
Two 5,000-count true-rms digital multimeters
Oscilloscope Bandwidth 20 MHz
Meter and Scope Recorder
Shielded test leads for oscilloscope, resistance and continuity measurements

Bestseller No. 2

Handheld unit combines a two-channel digital oscilloscope for viewing electrical signals with a digital multimeter for measuring voltage and resistance
Real-time sample rate is 625Ms/s for 60MHz models, 1.25GS/s for 100MHz models, 2.5GS/s for 200MHz models, and 5GS/s for 500MHz models, and record length is 10,000 points per channel for acquiring detailed waveforms
Zoom function, three math functions plus FFT, and automatic and cursor measurements for analyzing waveforms
6" color LCD shows up to four readings or waveforms simultaneously
Meets EN and IEC 61010-1:2001 and 61010-031:2002+A1:2008, ANSI/ISA 61010-1 (82.02.01), and CAN/CSA C22.2 61010-1-04 safety standards, and is rated CAT III installations to 1,000V and CAT IV installations to 600V

Bestseller No. 3

Handheld, four channel digital oscilloscope for viewing electrical signals with multi meter mode for measuring voltage, frequency, duty cycle, and power
Real time sample rate is 1.25GS/s for 100MHz models and 2.5GS/s for 200MHz models, and record length is 10,000 points per channel for acquiring detailed wave forms
Zoom function, three math functions plus FFT, and automatic and cursor measurements for analyzing waveforms
6 inches color LCD shows up to four readings or waveforms simultaneously
Meets EN and IEC 61010 to 1:2001 and 61010-031:2002+A1: 2008, ANSI/ISA 61010-1 (82.02.01), and CAN/CSA C22.2 61010 1 04 safety standards, and is rated CAT III installations to 1,000V and CAT IV installations to 600V

SaleBestseller No. 4

Current probe is based on hall effect technology
Use in measurement of both DC and AC current
It may be used in conjunction with oscilloscopes and other suitable recording instruments for accurate non-intrusive current measurement
Output Sensitivity: 10 mV/A (40 A) to 1 mV/A (400 A)
Load impedance: greater than 10 k ohms and less than or equal to 100 pF

SaleBestseller No. 5

4 Piece NiMH rechargeable battery pack
The battery pack has to be charged in the instrument
Performing refresh cycles on a regular basis, as provided by the 120 Series ScopeMeter, will strongly contribute to the lifespan of the batteries
4.8V Nominal voltage
3000 mAh capacity

Bestseller No. 6

Search B0140W5FXA on . ca to read its reviews
Compactness, beautiful appearance & friendly interfaces. Quickly and accurately detect the faults of the circuit; could serve as an electronic engineer's Assistant, provide great convenience
It features 6000-count high-precision Multimeter chip, NPX intelligence collection chipset. 4100 mAh Sony lithium-battery long working hours
It combines Scope function, Multimeter function and signal generator function
The bandwidth is 50 MHz, The sampling rate is 200 MSA/S, and it owns 320240 mm high-resolution color-screen

SaleBestseller No. 7

PRV240 reduces the risk of shock and arc flash by validating the functionality of test tools without placing yourself in a potentially hazardous electrical environment
Sources both AC and DC steady-state voltage - supplies 240 V DC/AC
A single LED indicates functionality, making this unit a simple-to-use solution for verification of your test tool
Compatible with both high impedance or low impedance multimeters, clamp meters or two pole testers
Voltage is sourced through recessed contacts that are activated when tested probes are inserted to avoid accidental contact

SaleBestseller No. 8

Measurement range: 0 to 260 Degree Celsius
Exposed junction for flat or slightly convex surfaces such as plates and rollers
1.3-meter (4 feet) lead
Type-K thermocouple for flat or curved surfaces such as plates and rollers
9.525 cm (3.75-Inch) probe with Teflon insulation

Bestseller No. 9

Great for back-probing harness connectors and automotive sensors
Flexible silicon bends for difficult areas
Can be used up to 30 Volts
Connects to test leads with removable ends
Flexible 1.5 inch silicon pins provide easy back probing connections for DMM and scope measurements

SaleBestseller No. 10

Accurate frequency measurements on adjustable speed drives (ASD) due to Fluke-designed low-pass filter
Captures intermittents as fast as 250 µS with Peak Capture
Switchable high display resolution allows 6000 to 20,000 counts – lets you see small changes in displayed readings.CAT III 1000V, CAT IV 600V safety rated
Measure up to 1000 VAC and DC; Operating Altitude: 2000 m