Our Top 10 Recommendations for Cheap Oscilloscopes

Up-to-date pricing and reviews for cheap oscilloscopes on the market

SaleBestseller No. 1

200 mhz bandwidth
Real-time sampling rate up to 1 gsa/use
IRecord length up to 14 Mpts
Standard serial bus triggering and decode, supports iic, spi, uart, Rs232, can, and lin
1M points fft

Bestseller No. 2

Bestseller No. 3

UPGRADED VERSION -- The sensitivity of Q15001 has been extended in both directions and is higher and wider. It reaches 5mV/div -- 20V/div. Also, this updated version can be handheld.
DESIGNING TO YOUR NEEDS -- Display and MCU are mounted on the same board (mainboard) to avoid using inter-board pin-headers. Analog channel is placed on a separate board that contains most user install parts, so the analog and digital circuits can be better separated.
ROTARY ENCODER -- It has been added the rotary encoder, makes parameter adjustment quicker and easier.
ASSEMBLED FINISHED -- Quimat Q15001 oscilloscope is an Assembled finished Machine. NOT DIY PART, it can be used directly to avoid assembling welding process problems and greatly saves the assembly time.
WHAT YOU GET -- You will get an assembled oscilloscope, BNC-clip cable and a power pupply. Detailed Operation instructions troubleshooting guide and schematic are also provided.

SaleBestseller No. 4

𝐂𝐨𝐬𝐭 𝐄𝐟𝐟𝐞𝐜𝐭𝐢𝐯𝐞 : 100 MHz analog bandwidth,Real-time sampling rate up to 500MSa / s and the price is moderate.
𝐇𝐃 𝐒𝐜𝐫𝐞𝐞𝐧 : 2.4'' color TFT- LCD display with 320 x 240 resolution.
𝐏𝐨𝐫𝐭𝐚𝐛𝐥𝐞 : Ultra small form factor easy to hand-held and carry. it's always ready when you need it.
𝐎𝐧𝐞 𝐊𝐞𝐲 𝐒𝐚𝐯𝐢𝐧𝐠 : The built-in 64 MB flash storage for up to 2000 waveform images.The storage process is easy and fast.
𝐄𝐚𝐬𝐢𝐥𝐲 𝐌𝐞𝐚𝐬𝐮𝐫𝐢𝐧𝐠 : Auto/Normal/Single 3 Trigger modes,it is easy to capture instantaneous waveform.

SaleBestseller No. 5

100MHz bandwidths;1GSa/s Real Time sample rate.
Large (7.0-inch) color display,WVGA(800x480);Record length up to 40K.
Trigger mode: edge/pulse width/line selectable video/slop/overtime etc.
USB host and device connectivity, standard;Multiple automatic measurements.
Four math functions, including FFTs standard;Provides software for PC real-time analysis.

Bestseller No. 6

This oscilloscope was designed as a training oscilloscope. Circuit is simple , reliable .
It contains only the basic oscilloscope functions with no fancy features. Simplicity in structure and easiness in assembly/operation are among the main targets of the design
Full assembled with case , not DIY Kit! It contains only the basical oscilloscope functions with no fancy features.
Simplicity in structure and easiness in assembly/operation are among the main targets of the design.
Detailed assembly instructions are provided in combination with troubleshooting guide and schematc. Source codes are also available to allow user to add their own features.

Bestseller No. 7

This kit uses ARM Cortex-M3 processor (STM32F103C8), and includes a 2.4-inch color TFT display screen, can be used as ARM test development board.Can freeze at any time waveform display (HOLD function).Comes 1Hz /3.3V square wave test signal source.
With automatic, regular and one-shot modes, easy to capture the moment waveform.Available rising or falling edge trigger.Observable previous trigger waveform (negative delay).
With waveform parameter digital display, including frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values.Waveform storage function: will not lose the waveform after power off.
Partially open-sourced,the MCU has been programmed.The oscilloscope circuit boards components are pre-soldered, no need soldered by yourself.The case is unassembled and requires assembly.
Adjustable vertical displacement,and with instructions,which increase the likelihood of adding different features or developing new applications on the hardware for users.

SaleBestseller No. 8

Bestseller No. 9

★ 1: 110MHz bandwidth, 1GSa / s real-time sampling rate, dual channel, 2ns / div ～ 1000s / div time base range; storage depth (record length of each acquired waveform) is not less than 10K sampling points; stored waveform is not less 16 groups; with U disk storage function; USB Device & Host interface;Host software download address: http://www.hanmatek.cn/en/index.php?s=/List/index/cid/28.html
★ 2: 7 inch TFT (True Color) LCD screen, 65535 colors, resolution 800 × 480 pixels; support cursor measurement, cursor mode is not less than voltage difference (△ V), time difference (△ T), time difference & voltage difference ( △ V), four modes of automatic cursor;
★ 3: With automatic range function, support horizontal, vertical, single waveform / multi-waveform tracking; probe attenuation multiples of 1X, 10X, 100X, 1000X, four kinds;
★ 4: Built-in 6-bit hardware frequency meter, which can measure 2Hz ~ 20MHz; with current measurement function, measurement range: 100.0mA / V ~ 1KA / V;
★ 5: It has 30 kinds of automatic measurement functions, and can customize the measurement menu; it has the waveform interception function, and can be seamlessly connected with the same brand signal generators. Support LABVIEW communication, support secondary development. Ultra-portable oscilloscope with a volume of 301 x 152 x 70 mm, ultra-thin body design, thickness of 70 mm, weight of 1.1 kg, saving more desktop space, ultra-quiet design, power consumption not higher than 18W

SaleBestseller No. 10

Dso138 2. 4" Tft 1msps digital oscilloscope kit for DIY it's easy to solder.
Oscilloscope functions with no fancy features. Simplicity in structure and easiness in assembly
It uses 2. 4-Inch tft lcd (320 x 240 dot-matrix, 262K colors) as its display element and displays nice
Detailed assembly instructions are provided in combination with troubleshooting guide and schematc.
7-24 friendly customer service provided.