Our Top 10 Recommendations for 300MHz Oscilloscopes
Up-to-date pricing and reviews for 300MHz oscilloscopes on the market
Bestseller No. 1
Hantek PP300 Oscilloscope probes (pack of 2), 300MHz
- 300MHz BandWidth,
- x1/x10 Attenuation,
- System Input Resistance: 10M / 1M, Tip/Head Style: 5 mm
- Typical Input Capacity: 85-115pF / 18.5-22.5pF, Cable Length:1200 mm
- Max. Voltage: x1: <200V DC + Peak AC, x10: <600V DC + Peak AC
Bestseller No. 2
Rigol DS2302A - 300 MHz 2 Channel Digital Oscilloscope
- 300 MHz, 2 Channel Oscilloscope with 2 GSa/sec and 14 Mpts memory standard as well as low noise front end. 50 Ohm input included
- Model DS2302A
- 300 MHz analog bandwidth
- Wider vertical range(500uV/div ~ 10V/div), lower noise floor, Better for small signal capturing
- Max. sample rate 2G Sa/s
Bestseller No. 3
OWON XDS3302 Digital storage oscilloscope, 2ch, 300MHz, 2.5GS/s, 40M record length, Multi-Touch Screen, support SPI/I2C/RS232/CAN trigger & decoding
- OWON XDS3302 Digital storage oscilloscope, 2ch, 300MHz, 2.5GS/s, 40M record length, Multi-Touch Screen, support SPI/I2C/RS232/CAN trigger & decoding
- 40M record length, max 75,000 wfms/s waveform refresh rate
- low background noise, vertical sensitivity in 1 mV/div - 10 V/div
- SCPI, and LabVIEW supported
- multi-interface integration - USB host, USB device, USB port for PictBridge, LAN, AUX, and more
SaleBestseller No. 4
Tektronix TDS3034C, 300 MHz, 4 Channel, Analog Oscilloscope, 2.5 GS/s Sampling, 3-Year Warranty
- 300MHz, four-channel analog oscilloscope for electronics applications such as product design, assembly lines, repair and servicing, and electrical engineering education
- Maximum real-time sample rate of 2.5GS/s per channel and record length of 10kpts per channel for acquiring detailed waveforms
- Advanced triggers for isolation of specific signals
- 6.5" color TFT-LCD with anti-glare surface for viewing waveforms
- TekProbe interface for use with active, differential, and current probes (sold separately) for automatic scaling and units
Bestseller No. 5
High Voltage Oscilloscope Clip Probes 5000V 300MHz 1.15ns Rise Time 100X for Tektronix HP Worldwide+ 5pcs Automotive Diagnostic Test Accessories Probe
- -5 pieces probes and 10 pieces replacement needles: As probes, they are used for the drilling of the insulation of wires to allow for automotive electrical measurements without causing damage to the wires.
- -They can be used as a pin probe of the rush to work with small circuit boards. The set of 5 probes also comes with 10 pins of replacement; there is no need to replace the entire probe.
- -Its small diameter, extra pin makes it great for the perforation of the insulation on wires. It can connect with 4mm banana plug as the following picture show.
- -Oscilloscope probe: Type: BNC; Bandwidth: 300MHz; Attenuation Ratio: 100:1. BNC Male: external insulation compatiable with all the BNC oscilloscope. Fully insulted grounding wire: the ground wire is closely matched with the probe body.
- -Attachment hook: accessories for new design. Compensation capacitance adjust hole: square wave calibration for 1KHz. It used on an oscilloscope.
Bestseller No. 6
General Oscilloscope Passive Probe 300MHz IP2230 10x Attenuation
- This probe is 300MHz Oscilloscope probes with a switch for 10x attenuation
- This passive probe is good oscilloscope accessories, it is suitable for oscilloscope
- A good helper for instrument engineer
SaleBestseller No. 7
Owon SDS9302-V Series SmartDS Deep Memory Digital Storage Oscilloscope with VGA Interface, 2 Channels, 300MHz, 3.2GS/s Sample Rate
- 300 MHz, two-channel digital oscilloscope for electronics applications such as product design and debugging, repair and servicing, and electrical engineering education
- Maximum real-time sample rate of 1.6 GS/s per channel and record length of 10 Mpts per channel for acquiring and processing detailed waveforms
- Advanced triggers allow isolation of specific signals and a trigger hold-off function stabilizes triggering on complex waveforms
- Three math functions plus FFT and 20 automatic measurements for analyzing waveforms
- 8" color TFT-LCD for viewing waveforms and a VGA port for connecting to an external monitor
Bestseller No. 8
300MHz Oscilloscope Probe,IP2230 Oscilloscope Passive Probe 10X Attenuation Electrical Testing Accessory
- Passive oscilloscope probe with a bandwidth of 300MHz and a switch with 10X attenuation.
- With positioning sleeve, it can make sure the stability and reliability of the tip exposed to the test point.
- Universal oscilloscope probe, complete accessories, suitable for most oscilloscope installation and use.
- Marking rings with different colors help to identify different channels and facilitate measurement.
- The probe compensation range is 10‑50pf, stable performance, making detection and measurement simple.
Bestseller No. 9
SDENSHI 300 MHz Oscilloscope Probes Probe Tip Measuring Cable Connector, Compensation
- -BNC Male: external insulation compatiable with all the BNC oscilloscope
- -Type: BNC; Bandwidth: 300MHz; Attenuation Ratio: 100:1
- -Fully insulted grounding wire: the ground wire is closely matched with the probe body.
- -Compensation capacitance adjust hole: square wave calibration for 1KHz. It used on an oscilloscope.
- -Attachment hook: accessories for new design. It is very convenient.
Bestseller No. 10
Tenma Oscilloscope, 300Mhz, 2-Ch, 2Gsps - 72-7635
- Price For: EachOrder Unit: Each 1 Bandwidth:: 300 Calculated Rise Time:: 1.2 Display Memory Depth:: 16 Mpts Kit Contents:: Probe x 2 (1x, 10x Switchable), Power Cord , USB Cable, PC Software CD Plug Type:: - Product Range:: - SVHC:: To Be Advised Sampling Rate:: 2 Scope Channels:: 2 Analogue Scope Display Type:: LCD Color
Leave a Reply